Modules dedicated to heating devices include boiler controllers and room panels. Due to the large number of heating system configurations , we offer different product groups. Thus, in the GECO offer you can find control systems for both solid fuel boilers and for electrode boilers. We are open to modifications of current solutions, as well as joint development of new technologies. Our wide range of products is shown below. If you need additional accessories that work with these, you will find them in the Additional Products category.
The GA01HA room control panel is a device which have been fitted for full communication with GECO heating controllers.
The GA01HA room control panel after connection with controller allows to control boiler operation comfortably from user’s apartment. Room control panel enables not only preview of temperatures of heating cycles and preview operation devices status but also gives user opportunity of direct control.
The panel is offering a weather adjustment mode (based on heating curves). It enables to control boiler operation in mode of time zones.
Properties
- modern and functional visualisation of casing
- single-module construction enables comfortable installation in the user’s apartment
- graphical display of the LCD type
- direct preview of devices operation status and temperatures of heating cycles
- capability to remote control cycles temperature from the user’s apartment
- weather adjustment mode (heating curves and measurement of temperature outside) – available only in the case of co-operation with the controller equipped with an external temperature sensor
- time zones (control of heating cycle under diurnal and weekly)
- outside temperature preview (if co-controller equipped with an external temperature sensor)
- real-time clock indicating time and date on the panel display
- sound signal of the alarms
- wired communication with the controller – twisted pair cabling UTP
- many language versions
The GA01HC-01 room panel is a microprocessor-based device manufactured using Surface Mount Technology (SMT).
The GA01HC-01 room panel has been designed to communicate fully with the GECO GH07EA electrode boiler controller, enabling comfortable control of the boiler from the home. Using the room panel as an interface with the controller mounted on the boiler makes the controller distinctly more convenient to use. The GA01HC-01 room panel has a built in sensor to measure the room temperature.
Properties
Connnecting the GA01HC-01 room panel to the controller allows:
- Changing boiler input temperature
- Changing boiler output temperature
- Changing hot water temperature
- Overview of boiler operation
- Monitoring the work of equipment (Boiler, heating pump, hot water pump)
- Overview of all measured temperatures
- Information about all boiler alarms to be viewed in text format
The GH07EB is a controller to heating electrode (ion) boiler.
The GH07EB supervises the process of preparing hot utility water (HUW cycle), allows to operate main heating circuit (central heating – CH cycle) and floor heating instalation.
The GH07EB controller has been fitted for full communication with the GA01HC room panel (manufactured by GECO) which allows to control boiler operation comfortably from user’s apartment.
Properties
- modern and functional visualisation of casing
- four-section display of the LED type
- single-module construction enables comfortable installation on the boiler
- cooperation with the HUW pump (Hot Utility Water)
- disinfection of the HUW cycle (Anti-Legionella function)
- HUW priority function
- cooperation with room panel GA01HC (control boiler operation from user’s apartment)
- SUMMER mode
- operation of additional temperature sensor use to control room temperature or safety sensor in prevention of high rise outlet temperature boiler
- possible to cooperate with any room thermostat
- possible to use temperatlimiter STB for safety reason
- sound signal for the alarm
The GH10NA is a controller for central heating boilers with air blow.
The GH10NA supervises the process of preparing hot utility water (HUW cycle), and allows to operate main heating circuit (central heating – CH cycle).
The GH10NA is adapted for TS-35 rail assembly, it has specially designed casing making it possible to install the controller in many different positions on the boiler.
Properties
- ront panel covered with plexiglas, resistant to external factors and more durable
- modern and functional operation panel by touch sensors
- four-segment LED display
- two-module construction (executive module + control panel)
- cooperation with the HUW pump (Hot Utility Water)
- desinfection of the HUW cycle (Anti-Legionella function)
- HUW priority and Summer mode functions
- possible to meassure flue gas temperature (Pt1000 sensor)
- possible to cooperate with any room thermostat
- controls fan rotation
- possible to use temperature limiter STB for safety reason
- additional protective relay on fan output
- sound signal for the alarms
- provides storage of all controller settings in case of power failure
- soft-start of the fan.
The GH10RA is a controller for central heating boilers with burners with feeding screw.
The GH10RA supervises the process of preparing hot utility water (HUW cycle), and allows to operate main heating circuit (central heating – CH cycle).
The GH10RA is adapted for TS-35 rail assembly, it has specially designed casing making it possible to install the controller in many different positions on the boiler.
Properties
- ront panel covered with plexiglas, resistant to external factors and more durable
- modern and functional operation panel by touch sensors
- two-module construction (executive module + control panel)
- cooperation with the HUW pump (Hot Utility Water)
- desinfection of the HUW cycle (Anti-Legionella function)
- HUW priority and Summer mode functions
- cooperation with reed relay (breaking cotter pin the motoreductor)
- possible to cooperate with any room thermostat
- controls fan and fuel feeder work
- possible to use temperature limiter STB for safety reason
- additional protective relay on fan and fuel feeder outputs
- sound signal for the alarms
- detection of maximum temperature in the burner feeder (flame mooving back protection)
- provides storage of all controller settings in case of power failure
The GH10TA is a controller for central heating boilers with burners with piston feeder.
The GH10TA supervises the process of preparing hot utility water (HUW cycle), and allows to operate main heating circuit (central heating – CH cycle).
The GH10TA is adapted for TS-35 rail assembly, it has specially designed casing making it possible to install the controller in many different positions on the boiler.
Properties
- ront panel covered with plexiglas, resistant to external factors and more durable
- modern and functional operation panel by touch sensors
- four-segment LED display
- two-module construction (executive module + control panel)
- cooperation with the HUW pump (Hot Utility Water)
- desinfection of the HUW cycle (Anti-Legionella function)
- HUW priority and Summer mode functions
- cooperation with reed relay (breaking cotter pin the clutch)
- possible to cooperate with any room thermostat
- controls fan and fuel feeder work
- possible to use temperature limiter STB for safety reason
- additional protective relay and fuel feeder outputs
- sound signal for the alarms
- detection of maximum temperature in the burner feeder (flame mooving back protection)
- provides storage of all controller settings in case of power failure
The GH11MA is a controller for central heating blow boilers.
The GH11MA supervises the process of preparing hot utility water (HUW cycle), and allows to operate main heating circuit (central heating – CH cycle).
The GH11MA controller has been fitted for full communication with the GA01HA room panel (manufactured by GECO) which allows to control boiler operation comfortably from user’s apartment.
Properties
- modern and functional visualisation of casing
- four-section display of the LED type
- single-module construction enables comfortable installation on the boiler
- cooperation with the HUW pump (Hot Utility Water)
- disinfection of the HUW cycle (Anti-Legionella function)
- HUW priority function
- cooperation with room panel (control boiler operation from user’s apartment.
- SUMMER mode
- smooth control over fan rotations
- measurement of the flue gases temperature
- build-in temperature limiter STB
- sound signal of the alarms
The GH11NA is a controller for central heating blow boilers.
The GH11NA supervises the process of preparing hot utility water (HUW cycle), and allows to operate main heating circuit (central heating – CH cycle).
The GH11NA controller has been fitted for full communication with the GA01HA room panel (manufactured by GECO) which allows to control boiler operation comfortably from user’s apartment.
Properties
- modern and functional visualisation of casing
- four-section display of the LED type
- single-module construction enables comfortable installation on the boiler
- cooperation with the HUW pump (Hot Utility Water)
- disinfection of the HUW cycle (Anti-Legionella function)
- HUW priority function
- cooperation with room panel (control boiler operation from user’s apartment)
- SUMMER mode
- smooth control over fan rotations
- measurement of the flue gases temperature
- Pomiar temperatury spalin
- build-in temperature limiter STB
- sound signal of the alarms
The GH11RA is a controller for central heating boilers with burners with feeding screw.
The GH11RA supervises the process of preparing hot utility water (HUW cycle), and allows to operate main heating circuit (central heating – CH cycle).
The GH11RA controller has been fitted for full communication with the GA01HA room panel (manufactured byGECO) which allows to control boiler operation comfortably from user’s apartment.
Properties
- modern and functional visualisation of casing
- four-section display of the LED type
- single-module construction enables comfortable installation on the boiler
- cooperation with the HUW pump (Hot Utility Water)
- disinfection of the HUW cycle (Anti-Legionella function)
- HUW priority function
- cooperation with room panel (control boiler operation from user’s apartment
- SUMMER mode
- smooth control over fan rotations
- cooperation with reed relay (breaking cotter pin on the motoreductor)
- detection of maximum temperature in the burner feeder (flame moving back protection for the feeder)
- build-in temperature limiter STB
- sound signal of the alarms
The GH11TA is a controller for central heating boilers with burners with piston feeder.
The GH11TA supervises the process of preparing hot utility water (HUW cycle), and allows to operate main heating circuit (central heating – CH cycle).
The GH11TA controller has been fitted for full communication with the GA01HA room panel (manufactured by GECO) which allows to control boiler operation comfortably from user’s apartment.
Properties
- modern and functional visualisation of casing
- four-section display of the LED type
- cooperation with the HUW pump (Hot Utility Water)
- disinfection of the HUW cycle (Anti-Legionella function)
- HUW priority function
- cooperation with room panel (control boiler operation from user’s apartment)
- SUMMER mode
- smooth control over fan rotations
- new algorithm allows to give equal portions of fuel with the possibility of division the entire dose into smaller portions
- detection of maximum temperature in the burner feeder (flame moving back protection for the feeder)
- build-in temperature limiter STB
- sound signal of the alarms
- single-module construction enables comfortable installation on the boiler
The GH21PB is a controller for central heating boilers with burners prepared to burn wooden pellets. It feeds fuel precisely and controls air flow into the process of burning.
With the inclusion of the heater device, flue gas sensor and flame sensor the controller allows automatic flame ignition in case of a fuel burnout.
Controller supervises the process of preparing domestic hot water (DHW) and allows to operate main heating circuit (central heating – CH cycle).
The GH21PB controller has been fitted for full communication with the GA03HA room panel (manufactured by GECO).
Properties
- Functional visualisation of casing and large readable graphic LCD display.
- Single-module construction enables comfortable installation on the boiler .
- Possible to meassure flue gas temperature (PT 1000)
- Possible of control over two screw feeders: the burner feeder and the container feeder
- Anit-stagnation protection for the executive devices – ANTI STOP function
- Desinfection of the DHW cycle (Anti Legionella), DHW priority, Summer mode function.
- Co-operation with room panel GA03HA (full control of boiler operation from apartament).
- Adaptation mode regulation which adjust fan rotation to individual boiler dynamics.
- Control temperature in the burner feeder and flame sensor to ignition mode (option).
- Sound and text alarm signals.
- Built -in temperature limiter in standard (STB).
- Many language versions.
- Boiler operational parameters archiving function, among others alarm controller record.
- Soft start of the fan.
- Possibility of selecting type of controller regulation: ADAPTATION MODE, GRATE MODE.
The GH21RA is a controller for central heating boilers with burners with feeder screw.
GH21RA allows the main heating circuit (central heating-CH) to operate. The controller also oparates work of an additional pump. The pump supervises the process of preparing domestic hot water (DHW) or executing mixing pump work. User has possibility of selecting type of controller regulation.
The GH21RA controller has been fitted for full communication with the GA03HA room panel (manufactured by GECO) which allows boiler operation to be controlled comfortably from user’s apartment.
Properties
- Functional visualisation of casing, large graphic LCD display and very readable text menu;
- Single-module construction enables comfortable installation on the boiler;
- Disinfection of the DHW circulation (Anti-Legionella function);
- HUW priority function and SUMMER mode;
- Anit-stagnation protection for the executive devices – ANTI STOP function;
- Possibility of adjusting individual hysteresis value (C.H. and D.H.W.);
- Co-operation with room panel GA03HA (full control of boiler operation from apartament);
- Smooth control over fan rotations;
- Co-operation with reed relay (breaking cotter pin on the motor-reductor);
- Control temperature in the burner feeder;
- Built -in temperature limiter in standard (STB).
- Sound and text alarm signals.
- The most of language versions, possiible choose main screen profile or modify existing;
- Boiler operational parameters archiving function, among others alarm controller record.
- Additional relay, which protects fan and feeder output connectors when the triacs is closed, and allows for emergency work when this is happend.
- Possibility of selecting type of controller regulation for example: FIRE GRATE MODE.
The GH21TA is a controller for central heating boilers with burners with piston feeder.
GH21TA allows the main heating circuit (central heating-CH) to operate. The controller also oparates work of an additional pump. The function of this additional pump depends of which heating configuration is selected. The pump supervises the process of preparing hot utility water (DHW) or executing mixing pump work.
The GH21TA controller has been fitted for full communication with the GA03HA room panel (manufactured by GECO) which allows boiler operation to be controlled comfortably from user’s apartment.
Properties
- Functional visualisation of casing and large readable graphic LCD display.
- Single-module construction enables comfortable installation on the boiler .
- Disinfection of the DHW circulation (Anti-Legionella function)
- DHW priority function and SUMMER mode.
- Anit-stagnation protection for the executive devices – ANTI STOP function
- Possibility of adjusting individual hysteresis value (CH and DHW).
- Co-operation with room panel GA03HA (full control of boiler operation from apartament).
- Smooth control over fan rotations.
- Co-operation with reed relay (breaking cotter pin on the motor-reductor).
- Control temperature in the burner feeder.
- Built -in temperature limiter in standard (STB).
- Sound and text alarm signals.
- Many language versions. choose main screen function;
- Boiler operational parameters archiving function, among others alarm controller record.
- Additional relay, which protects fan and feeder output connectors when the triacs is closed, and allows for emergency work when this is happend.
- Possibility of selecting type of controller regulation among others FIRE GRATE MODE.
The GH22PB is a controller for central heating boilers with burners prepared to burn wooden pellets. It feeds fuel precisely and controls air flow into the process of burning.
With the inclusion of the heater device and flue gas sensor (flame sensor) the controller allows automatic flame ignition in case of a fuel burnout.
The GH22PB supervises the process of preparing domestic hot water (DHW) and allows to operate main heating circuit (central heating cycle).
The GH22PB controller has been fitted for full communication with the GA03HA room panel (manufactured by GECO).
Properties
- Functional visualisation of casing and large readable graphic LCD display.
- Two module construction (module + panel) enable assembly inside boiler construction.
- Possible to meassure flue gas temperature (PT 1000)
- Possible of control over two screw feeders: the burner feeder and the container feeder
- Anit-stagnation protection for the executive devices – ANTI STOP function
- Desinfection of the DHW cycle (Anti Legionella), DHW priority, Summer mode function.
- Co-operation with room panel GA03HA (full control of boiler operation from apartament).
- Automatic mode regulation which adjust fan rotation to individual boiler dynamics.
- Control temperature in the burner feeder and flame sensor to ignition mode (option).
- Sound and text alarm signals.
- Possible to use temperature limiter STB for safety reason.
- Many language versions.
- Boiler operational parameters archiving function, among others alarm controller record.
- Soft start of the fan.
- Possibility of selecting type of controller regulation: ONLY PUMP MODE, GRATE MODE.
The GH22RA is a controller for central heating boilers with burners with feeder screw.
GH22RA allows the main heating circuit (central heating-CH) to operate. The controller also oparates work of an additional pump. The function of this additional pump depends of which heating configuration is selected. The pump supervises the process of preparing domestic hot water (DHW) or executing mixing pump work.
The GH22RA controller has been fitted for full communication with the GA03HA room panel (manufactured by GECO) which allows boiler operation to be controlled comfortably from user’s apartment.
Properties
- Functional visualisation of casing and large readable graphic LCD display;
- Two-module construction (module + panel) enable assembly inside boiler construction;
- Disinfection of the DHW circulation (Anti-Legionella function);
- HUW priority function and SUMMER mode;
- Anit-stagnation protection for the executive devices – ANTI STOP function;
- Possibility of adjusting individual hysteresis value (CH and DHW);
- Co-operation with room panel GA03HA (full control of boiler operation from apartament);
- Smooth control over fan rotations;
- Co-operation with reed relay (breaking cotter pin on the motor-reductor);
- Control temperature in the burner feeder;
- Possible to use temperature limiter STB for safety reason
- Sound and text alarm signals;
- Many language versions and choose main screen function;
- Boiler operational parameters archiving function, among others alarm controller record;
- Additional relay, which protects fan and feeder output connectors when the triacs is closed and allows for emergency work when this is happend;
- Possibility of selecting type of controller regulation among others FIRE GRATE MODE;
The GA01HA room control panel is a device which have been fitted for full communication with GECO heating controllers.
The GA01HA room control panel after connection with controller allows to control boiler operation comfortably from user’s apartment. Room control panel enables not only preview of temperatures of heating cycles and preview operation devices status but also gives user opportunity of direct control.
The panel is offering a weather adjustment mode (based on heating curves). It enables to control boiler operation in mode of time zones.
Properties
- modern and functional visualisation of casing
- single-module construction enables comfortable installation in the user’s apartment
- graphical display of the LCD type
- direct preview of devices operation status and temperatures of heating cycles
- capability to remote control cycles temperature from the user’s apartment
- weather adjustment mode (heating curves and measurement of temperature outside) – available only in the case of co-operation with the controller equipped with an external temperature sensor
- time zones (control of heating cycle under diurnal and weekly)
- outside temperature preview (if co-controller equipped with an external temperature sensor)
- real-time clock indicating time and date on the panel display
- sound signal of the alarms
- wired communication with the controller – twisted pair cabling UTP
- many language versions
The GA01HC-01 room panel is a microprocessor-based device manufactured using Surface Mount Technology (SMT).
The GA01HC-01 room panel has been designed to communicate fully with the GECO GH07EA electrode boiler controller, enabling comfortable control of the boiler from the home. Using the room panel as an interface with the controller mounted on the boiler makes the controller distinctly more convenient to use. The GA01HC-01 room panel has a built in sensor to measure the room temperature.
Properties
Connnecting the GA01HC-01 room panel to the controller allows:
- Changing boiler input temperature
- Changing boiler output temperature
- Changing hot water temperature
- Overview of boiler operation
- Monitoring the work of equipment (Boiler, heating pump, hot water pump)
- Overview of all measured temperatures
- Information about all boiler alarms to be viewed in text format
The GH10TA is a controller for central heating boilers with burners with piston feeder.
The GH10TA supervises the process of preparing hot utility water (HUW cycle), and allows to operate main heating circuit (central heating – CH cycle).
The GH10TA is adapted for TS-35 rail assembly, it has specially designed casing making it possible to install the controller in many different positions on the boiler.
Properties
- ront panel covered with plexiglas, resistant to external factors and more durable
- modern and functional operation panel by touch sensors
- four-segment LED display
- two-module construction (executive module + control panel)
- cooperation with the HUW pump (Hot Utility Water)
- desinfection of the HUW cycle (Anti-Legionella function)
- HUW priority and Summer mode functions
- cooperation with reed relay (breaking cotter pin the clutch)
- possible to cooperate with any room thermostat
- controls fan and fuel feeder work
- possible to use temperature limiter STB for safety reason
- additional protective relay and fuel feeder outputs
- sound signal for the alarms
- detection of maximum temperature in the burner feeder (flame mooving back protection)
- provides storage of all controller settings in case of power failure
The GH11TA is a controller for central heating boilers with burners with piston feeder.
The GH11TA supervises the process of preparing hot utility water (HUW cycle), and allows to operate main heating circuit (central heating – CH cycle).
The GH11TA controller has been fitted for full communication with the GA01HA room panel (manufactured by GECO) which allows to control boiler operation comfortably from user’s apartment.
Properties
- modern and functional visualisation of casing
- four-section display of the LED type
- cooperation with the HUW pump (Hot Utility Water)
- disinfection of the HUW cycle (Anti-Legionella function)
- HUW priority function
- cooperation with room panel (control boiler operation from user’s apartment)
- SUMMER mode
- smooth control over fan rotations
- new algorithm allows to give equal portions of fuel with the possibility of division the entire dose into smaller portions
- detection of maximum temperature in the burner feeder (flame moving back protection for the feeder)
- build-in temperature limiter STB
- sound signal of the alarms
- single-module construction enables comfortable installation on the boiler
The GH21TA is a controller for central heating boilers with burners with piston feeder.
GH21TA allows the main heating circuit (central heating-CH) to operate. The controller also oparates work of an additional pump. The function of this additional pump depends of which heating configuration is selected. The pump supervises the process of preparing hot utility water (DHW) or executing mixing pump work.
The GH21TA controller has been fitted for full communication with the GA03HA room panel (manufactured by GECO) which allows boiler operation to be controlled comfortably from user’s apartment.
Properties
- Functional visualisation of casing and large readable graphic LCD display.
- Single-module construction enables comfortable installation on the boiler .
- Disinfection of the DHW circulation (Anti-Legionella function)
- DHW priority function and SUMMER mode.
- Anit-stagnation protection for the executive devices – ANTI STOP function
- Possibility of adjusting individual hysteresis value (CH and DHW).
- Co-operation with room panel GA03HA (full control of boiler operation from apartament).
- Smooth control over fan rotations.
- Co-operation with reed relay (breaking cotter pin on the motor-reductor).
- Control temperature in the burner feeder.
- Built -in temperature limiter in standard (STB).
- Sound and text alarm signals.
- Many language versions. choose main screen function;
- Boiler operational parameters archiving function, among others alarm controller record.
- Additional relay, which protects fan and feeder output connectors when the triacs is closed, and allows for emergency work when this is happend.
- Possibility of selecting type of controller regulation among others FIRE GRATE MODE.
The GH10RA is a controller for central heating boilers with burners with feeding screw.
The GH10RA supervises the process of preparing hot utility water (HUW cycle), and allows to operate main heating circuit (central heating – CH cycle).
The GH10RA is adapted for TS-35 rail assembly, it has specially designed casing making it possible to install the controller in many different positions on the boiler.
Properties
- ront panel covered with plexiglas, resistant to external factors and more durable
- modern and functional operation panel by touch sensors
- two-module construction (executive module + control panel)
- cooperation with the HUW pump (Hot Utility Water)
- desinfection of the HUW cycle (Anti-Legionella function)
- HUW priority and Summer mode functions
- cooperation with reed relay (breaking cotter pin the motoreductor)
- possible to cooperate with any room thermostat
- controls fan and fuel feeder work
- possible to use temperature limiter STB for safety reason
- additional protective relay on fan and fuel feeder outputs
- sound signal for the alarms
- detection of maximum temperature in the burner feeder (flame mooving back protection)
- provides storage of all controller settings in case of power failure
The GH11RA is a controller for central heating boilers with burners with feeding screw.
The GH11RA supervises the process of preparing hot utility water (HUW cycle), and allows to operate main heating circuit (central heating – CH cycle).
The GH11RA controller has been fitted for full communication with the GA01HA room panel (manufactured byGECO) which allows to control boiler operation comfortably from user’s apartment.
Properties
- modern and functional visualisation of casing
- four-section display of the LED type
- single-module construction enables comfortable installation on the boiler
- cooperation with the HUW pump (Hot Utility Water)
- disinfection of the HUW cycle (Anti-Legionella function)
- HUW priority function
- cooperation with room panel (control boiler operation from user’s apartment
- SUMMER mode
- smooth control over fan rotations
- cooperation with reed relay (breaking cotter pin on the motoreductor)
- detection of maximum temperature in the burner feeder (flame moving back protection for the feeder)
- build-in temperature limiter STB
- sound signal of the alarms
The GH21RA is a controller for central heating boilers with burners with feeder screw.
GH21RA allows the main heating circuit (central heating-CH) to operate. The controller also oparates work of an additional pump. The pump supervises the process of preparing domestic hot water (DHW) or executing mixing pump work. User has possibility of selecting type of controller regulation.
The GH21RA controller has been fitted for full communication with the GA03HA room panel (manufactured by GECO) which allows boiler operation to be controlled comfortably from user’s apartment.
Properties
- Functional visualisation of casing, large graphic LCD display and very readable text menu;
- Single-module construction enables comfortable installation on the boiler;
- Disinfection of the DHW circulation (Anti-Legionella function);
- HUW priority function and SUMMER mode;
- Anit-stagnation protection for the executive devices – ANTI STOP function;
- Possibility of adjusting individual hysteresis value (C.H. and D.H.W.);
- Co-operation with room panel GA03HA (full control of boiler operation from apartament);
- Smooth control over fan rotations;
- Co-operation with reed relay (breaking cotter pin on the motor-reductor);
- Control temperature in the burner feeder;
- Built -in temperature limiter in standard (STB).
- Sound and text alarm signals.
- The most of language versions, possiible choose main screen profile or modify existing;
- Boiler operational parameters archiving function, among others alarm controller record.
- Additional relay, which protects fan and feeder output connectors when the triacs is closed, and allows for emergency work when this is happend.
- Possibility of selecting type of controller regulation for example: FIRE GRATE MODE.
The GH22RA is a controller for central heating boilers with burners with feeder screw.
GH22RA allows the main heating circuit (central heating-CH) to operate. The controller also oparates work of an additional pump. The function of this additional pump depends of which heating configuration is selected. The pump supervises the process of preparing domestic hot water (DHW) or executing mixing pump work.
The GH22RA controller has been fitted for full communication with the GA03HA room panel (manufactured by GECO) which allows boiler operation to be controlled comfortably from user’s apartment.
Properties
- Functional visualisation of casing and large readable graphic LCD display;
- Two-module construction (module + panel) enable assembly inside boiler construction;
- Disinfection of the DHW circulation (Anti-Legionella function);
- HUW priority function and SUMMER mode;
- Anit-stagnation protection for the executive devices – ANTI STOP function;
- Possibility of adjusting individual hysteresis value (CH and DHW);
- Co-operation with room panel GA03HA (full control of boiler operation from apartament);
- Smooth control over fan rotations;
- Co-operation with reed relay (breaking cotter pin on the motor-reductor);
- Control temperature in the burner feeder;
- Possible to use temperature limiter STB for safety reason
- Sound and text alarm signals;
- Many language versions and choose main screen function;
- Boiler operational parameters archiving function, among others alarm controller record;
- Additional relay, which protects fan and feeder output connectors when the triacs is closed and allows for emergency work when this is happend;
- Possibility of selecting type of controller regulation among others FIRE GRATE MODE;
The GH10NA is a controller for central heating boilers with air blow.
The GH10NA supervises the process of preparing hot utility water (HUW cycle), and allows to operate main heating circuit (central heating – CH cycle).
The GH10NA is adapted for TS-35 rail assembly, it has specially designed casing making it possible to install the controller in many different positions on the boiler.
Properties
- ront panel covered with plexiglas, resistant to external factors and more durable
- modern and functional operation panel by touch sensors
- four-segment LED display
- two-module construction (executive module + control panel)
- cooperation with the HUW pump (Hot Utility Water)
- desinfection of the HUW cycle (Anti-Legionella function)
- HUW priority and Summer mode functions
- possible to meassure flue gas temperature (Pt1000 sensor)
- possible to cooperate with any room thermostat
- controls fan rotation
- possible to use temperature limiter STB for safety reason
- additional protective relay on fan output
- sound signal for the alarms
- provides storage of all controller settings in case of power failure
- soft-start of the fan.
The GH11NA is a controller for central heating blow boilers.
The GH11NA supervises the process of preparing hot utility water (HUW cycle), and allows to operate main heating circuit (central heating – CH cycle).
The GH11NA controller has been fitted for full communication with the GA01HA room panel (manufactured by GECO) which allows to control boiler operation comfortably from user’s apartment.
Properties
- modern and functional visualisation of casing
- four-section display of the LED type
- single-module construction enables comfortable installation on the boiler
- cooperation with the HUW pump (Hot Utility Water)
- disinfection of the HUW cycle (Anti-Legionella function)
- HUW priority function
- cooperation with room panel (control boiler operation from user’s apartment)
- SUMMER mode
- smooth control over fan rotations
- measurement of the flue gases temperature
- Pomiar temperatury spalin
- build-in temperature limiter STB
- sound signal of the alarms
The GH07EB is a controller to heating electrode (ion) boiler.
The GH07EB supervises the process of preparing hot utility water (HUW cycle), allows to operate main heating circuit (central heating – CH cycle) and floor heating instalation.
The GH07EB controller has been fitted for full communication with the GA01HC room panel (manufactured by GECO) which allows to control boiler operation comfortably from user’s apartment.
Properties
- modern and functional visualisation of casing
- four-section display of the LED type
- single-module construction enables comfortable installation on the boiler
- cooperation with the HUW pump (Hot Utility Water)
- disinfection of the HUW cycle (Anti-Legionella function)
- HUW priority function
- cooperation with room panel GA01HC (control boiler operation from user’s apartment)
- SUMMER mode
- operation of additional temperature sensor use to control room temperature or safety sensor in prevention of high rise outlet temperature boiler
- possible to cooperate with any room thermostat
- possible to use temperatlimiter STB for safety reason
- sound signal for the alarm
The GH21PB is a controller for central heating boilers with burners prepared to burn wooden pellets. It feeds fuel precisely and controls air flow into the process of burning.
With the inclusion of the heater device, flue gas sensor and flame sensor the controller allows automatic flame ignition in case of a fuel burnout.
Controller supervises the process of preparing domestic hot water (DHW) and allows to operate main heating circuit (central heating – CH cycle).
The GH21PB controller has been fitted for full communication with the GA03HA room panel (manufactured by GECO).
Properties
- Functional visualisation of casing and large readable graphic LCD display.
- Single-module construction enables comfortable installation on the boiler .
- Possible to meassure flue gas temperature (PT 1000)
- Possible of control over two screw feeders: the burner feeder and the container feeder
- Anit-stagnation protection for the executive devices – ANTI STOP function
- Desinfection of the DHW cycle (Anti Legionella), DHW priority, Summer mode function.
- Co-operation with room panel GA03HA (full control of boiler operation from apartament).
- Adaptation mode regulation which adjust fan rotation to individual boiler dynamics.
- Control temperature in the burner feeder and flame sensor to ignition mode (option).
- Sound and text alarm signals.
- Built -in temperature limiter in standard (STB).
- Many language versions.
- Boiler operational parameters archiving function, among others alarm controller record.
- Soft start of the fan.
- Possibility of selecting type of controller regulation: ADAPTATION MODE, GRATE MODE.
The GH22PB is a controller for central heating boilers with burners prepared to burn wooden pellets. It feeds fuel precisely and controls air flow into the process of burning.
With the inclusion of the heater device and flue gas sensor (flame sensor) the controller allows automatic flame ignition in case of a fuel burnout.
The GH22PB supervises the process of preparing domestic hot water (DHW) and allows to operate main heating circuit (central heating cycle).
The GH22PB controller has been fitted for full communication with the GA03HA room panel (manufactured by GECO).
Properties
- Functional visualisation of casing and large readable graphic LCD display.
- Two module construction (module + panel) enable assembly inside boiler construction.
- Possible to meassure flue gas temperature (PT 1000)
- Possible of control over two screw feeders: the burner feeder and the container feeder
- Anit-stagnation protection for the executive devices – ANTI STOP function
- Desinfection of the DHW cycle (Anti Legionella), DHW priority, Summer mode function.
- Co-operation with room panel GA03HA (full control of boiler operation from apartament).
- Automatic mode regulation which adjust fan rotation to individual boiler dynamics.
- Control temperature in the burner feeder and flame sensor to ignition mode (option).
- Sound and text alarm signals.
- Possible to use temperature limiter STB for safety reason.
- Many language versions.
- Boiler operational parameters archiving function, among others alarm controller record.
- Soft start of the fan.
- Possibility of selecting type of controller regulation: ONLY PUMP MODE, GRATE MODE.
The GH11MA is a controller for central heating blow boilers.
The GH11MA supervises the process of preparing hot utility water (HUW cycle), and allows to operate main heating circuit (central heating – CH cycle).
The GH11MA controller has been fitted for full communication with the GA01HA room panel (manufactured by GECO) which allows to control boiler operation comfortably from user’s apartment.
Properties
- modern and functional visualisation of casing
- four-section display of the LED type
- single-module construction enables comfortable installation on the boiler
- cooperation with the HUW pump (Hot Utility Water)
- disinfection of the HUW cycle (Anti-Legionella function)
- HUW priority function
- cooperation with room panel (control boiler operation from user’s apartment.
- SUMMER mode
- smooth control over fan rotations
- measurement of the flue gases temperature
- build-in temperature limiter STB
- sound signal of the alarms
Pełna strona archiwalna znajduje się pod adresem: http://archiwum.geco.pl
GH02HA is a module designed to control three-phase electric motors.
It works only with “GECO” heating controllers. Controlling the current supplying the electric motor is possible thanks to direct connection to the regulator output (triac).
The GH02HA module has a single-module housing adapted for mounting on a TS-35 rail.
Properties
- phase presence control and signaling
- protection of each phase with a separate fuse
- outputs of individual phases switched on by triacs
- checking the condition of fuses and triacs
- the ability to control the output currents
- the ability to communicate with the controller via the RS 485 connector
The GA03HA room control panel is a device which have been fitted for full communication with GECO heating controllers.
The GA03HA room control panel after connection with controller allows to control boiler operation comfortably from user’s apartment. Room control panel enables not only preview of temperatures of heating cycles and preview operation devices status but also gives user opportunity of direct control.
The panel is offering a weather adjustment mode (based on heating curves). It enables to control boiler operation in mode of time zones.
Properties
- modern and functional visualisation of casing
- single-module construction enables comfortable installation in the user’s apartment
- graphical display of the LCD type
- direct preview of devices operation status and temperatures of heating cycles
- capability to remote control cycles temperature from the user’s apartment
- weather adjustment mode based on the heating curves – function is available only in controllers equipped with an external temperature sensor
- time zones (control of heating cycle under diurnal and weekly)
- outside temperature preview (if co-controller equipped with an external temperature sensor)
- real-time clock indicating time and date on the panel display
- sound signal of the alarms
- wired communication with the controller – twisted pair cabling UTP
- many language versions
- choice of room temperature stabilization methods in order to optimize
The GH08NA is a controller for central heating boilers with air blow.
The GH08NA supervises the process of preparing hot utility water (HUW cycle), and allows to operate main heating circuit (central heating – CH cycle). Possible communication with standard room panel.
The GH08NA has specially designed casing making it possible to install the controller in many different positions on the boiler.
Properties
- front panel covered with plexiglas, resistant to external factors and more durable
- modern and functional operation panel by touch sensors
- large readable graphic LCD display
- single-module construction enables comfortable installation on the boiler
- cooperation with the HUW pump (Hot Utility Water) include desinfection (Anti-Legionella)
- many language version
- HUW priority and Summer mode functions
- boiler operational parameters archiving function, among others alarm controller record
- possible to cooperate with any room thermostat
- controls fan rotation
- possible to use temperature limiter STB for safety reason
- output for external fuse
- sound signal for the alarms
- provides storage of all controller settings in case of power failure
- soft-start of the fan
The GH09NB is a controller for central heating blow boilers.
This controller supervises the process of preparing hot utility water (HUW cycle), and allows to operate main heating circuit (central heating – CH cycle).
The GH09NB has specially designed casing making it possible to install the controller in many different positions on the boiler
Properties
- modern and functional visualisation of casing
- four-section display of the LED type
- single-module construction enables comfortable installation on the boiler
- smooth control over fan rotations
- possibility for connection of the temperature limiter STB (connected into fan circut)
- sound signal of the alarms
- possibility for power supply by using of computer connectors IEC type
The GH09NB is a controller for central heating blow boilers.
It stabilizes the temperature of water and controls process of combustion in the boiler preventing a fire from burning outGH09NB allows to operate main heating circuit (central heating – CH cycle).
The GH09NB has specially designed casing making it possible to install the controller in many different positions on the boiler.
Properties
- modern and functional visualisation of casing
- four-section display of the LED type
- single-module construction enables comfortable installation on the boiler
- smooth control over fan rotations
- ossibility for connection of the temperature limiter STB (connected into fan circut)
- sound signal of the alarms
- ossibility for power supply by using of computer connectors IEC type
The GH10HA is a controller for central heating wood boilers, „HOLZGAS” type.
The GH10HA supervises the process of preparing hot utility water (HUW cycle), and allows to operate main heating circuit (central heating – CH cycle).
The GH10HA controller is adapted for TS-35 rail assembly, it has specially designed casing making it possible to install the controller in many different positions on the boiler.
Properties
- modern and functional visualisation of casing;
- four-segment LED display;
- two-module construction (executive module + control panel);
- cooperation with the HUW pump (Hot Utility Water);
- desinfection of the HUW cycle (Aniti-Legionella function);
- HUW priority and SUMMER mode function;
- possible to measure flugas temperature (PT1000);
- possible to cooperate with any room thermostat;
- controls fan rotation;
- possible to use temperature limiter STB for safety reason;
- additional protective relay on fan output;
- sound signal for the alarms;
- provides storage of all controller settings in case of power failure
- soft start of the fan
- possible to cooperative with door sensor
The GH10MA is a controller for culm and coal boilers with air blow.
The GH10MA supervises the process of preparing hot utility water (HUW cycle), and allows to operate main heating circuit (central heating – CH cycle).
The GH10MA is adapted for TS-35 rail assembly, it has specially designed casing making it possible to install the controller in many different positions on the boiler.
Properties
- modern and functional visualisation of casing
- four-segment LED display
- two-module construction (executive module + control panel)
- cooperation with the HUW pump (Hot Utility Water)
- desinfection of the HUW cycle (Anti-Legionella function)
- HUW priority and Summer mode functions
- flue gas temperature meassurement (PT1000 sensor)
- controls fan rotation (gear fan modulation by algorithm)
- possible to use temperature limiter STB for safety work
- additional protective relay on fan output
- sound signal for the alarms
- provides storage of all controller settings in case of power failure
- soft-start of the fan.
The GH10PA is a controller for central heating boilers with burners prepared to burn wooden pellets. It feeds fuel precisely and controls air flow into the process of burning. With the inclusion of the heater device and flame sensor the controller allows automatic flame ignition in case of a fuel burnout.
The GH10PA provides long and automatic boiler operation by maintaining a constant level of the fuel in the additional container.*
The GH10PA is adapted for TS-35 rail assembly, it has specially designed casing making it possible to install the controller in many different positions on the boiler.
The GH10PA is equipped with automatic firing mode.
*possibility for burners with additional tank.
Properties
- modern and functional visualisation of casing
- four-segment LED display
- two-module construction (executive module + control panel)
- possible control of the fuel level in the hopper
- control over two screw feeders: the burner feeder and the container feeder
- smoth control over fan rotation
- automatic ignition mode in case of fuel burnout
- possible to use temperature limiter STB for safety reason
- additional protective relay, enabling failover after triac failure
- sound signal for the alarms
- detection of maximum temperature in the burner feeder (flame mooving back protection)
- provides storage of all controller settings in case of power failure
- smoth fan start (SOFTSTART)
The GH10PC Controller is a microprocessor-based device manufactured using the Surface Mount Technology (SMT).
It is designed to control the main Central Heating (CH) water circuit. Control parameters can be adjusted to the current operating conditions and boiler type. The Controller includes a system protecting it from power outages and various other disturbances.
Properties
- Control parameters can be adjusted to the current operating conditions and boiler type.
- The Controller includes a system protecting it from power outages and various other disturbances.
- The GH10PC Controller is fitted with:
– Inputs analog:
1. for boiler output water temperature measurement (NTC sensor),
2. for connecting flame sensor,
– a digital input:
3. for check position of grates (Reed Relay),
4. for Room thermostat - Controller also contains five outputs allowing direct connection of 230 V AC devices, i.e.: the fan, the burner feeder, the grate, the CH circulation pump and the ignition heater.
The GH10PD Controller is a microprocessor-based device manufactured using the Surface Mount Technology (SMT).
It is designed to control the main Central Heating (CH) water circuit. Control parameters can be adjusted to the current operating conditions and boiler type. The Controller includes a system protecting it from power outages and various other disturbances.
Properties
- Control parameters can be adjusted to the current operating conditions and boiler type.
- The Controller includes a system protecting it from power outages and various other disturbances.
- The GH10PD Controller is fitted with:
-Inputs analog:
1. for boiler output water temperature measurement (NTC sensor),
-a digital input:
2. for check position of grates (Reed Relay),
3. for Room thermostat - Controller also contains five outputs allowing direct connection of 230 V AC devices, i.e.: the fan, the burner feeder, the grate, the CH circulation pump and the ignition heater.
The GH10PF is a controller for high temperature central heating boilers with burners prepared to burn wooden pellets.
It feeds fuel precisely and controls air flow into the process of burning, using PT1000 sensor to detect boiler temperature. With the inclusion of the heater device and flame sensor the controller allows automatic flame ignition in case of a fuel burnout.
The GH10PF is adapted for TS-35 rail assembly, it has specially designed casing making it possible to install the controller in many different positions on the boiler.
The GH10PF is equipped with automatic firing mode. It can manage work of two separate feeders for burners with additional storage. It can cooperate with boilers adjust in motion grate to remove the ash.
Properties
- modern and functional visualisation of casing
- four-segment LED display
- two-module construction (executive module + control panel)
- possible detection of boiler temperature by PT1000 sensor
- control over two screw feeders: the burner feeder and the container feeder
- smoth control over fan rotation
- automatic ignition mode in case of fuel burnout
- possible to use temperature limiter STB for safety reason
- possible to manage of motion grate which is use to clean burner from ashesr
- sound signal for the alarms
- detection of maximum temperature in the burner feeder (flame mooving back protection)
- provides storage of all controller settings in case of power failure
- smoth fan start (SOFTSTART)
- the controller can use flame sensor to manage automatic work
The GH11NB Controller is a microprocessor-based device manufactured using the Surface Mount Technology (SMT).
It is designed to control the processes of Hot Utility Water (HUW) heating and the main Central Heating (CH) water circuit. Control parameters can be adjusted to the current operating conditions and boiler type. The Controller includes a system protecting from power outages and other different disturbances.
Properties
- Control parameters can be adjusted to the current operating conditions and boiler type.
- The Controller includes a system protecting from power outages and other different disturbances.
- The GH11NB Controller is fitted with:
-inputs:
1. Boiler output water temperature measurement (NTC sensor),
2. HUW boiler water /return water temperature measurement (NTC sensor),
3. Flue gas temperature sensor in chimney (PT1000 sensor),
4. Standard thermostat
-digital input:
5. Input for connection of the room thermostat panel GA01HA-GECO. - Controller also contains four outputs allowing direct connection of 230 V AC devices: fan, CH circulation pump, HUW pump or mixing pump, depending on the type of the controlled heating system.
The GH11NB is a controller for central heating blow boilers.
The GH11NB supervises the process of preparing hot utility water (HUW cycle), and allows to operate main heating circuit (central heating – CH cycle).
The GH11NB controller has been fitted for full communication with the GA01HA room panel (manufactured by GECO) which allows to control boiler operation comfortably from user’s apartment.
Properties
- modern and functional visualisation of casing
- four-section display of the LED type
- single-module construction enables comfortable installation on the boiler
- cooperation with the HUW pump (Hot Utility Water)
- disinfection of the HUW cycle (Anti-Legionella function)
- HUW priority function
- cooperation with room panel (control boiler operation from user’s apartment)
- SUMMER mode
- smooth control over fan rotations
- measurement of the flue gases temperature
- build-in temperature limiter STB
- sound signal of the alarms
- standard thermostat input
The GH11TB controller is made using microprocessor technology automatic surface mounting.
This regulator controls the process of preparing domestic hot water (DHW circuit) and enables operation of the main heating circuit (CH circuit). Regulation parameters can be adjusted to current operating conditions and the type of boiler. The regulator is equipped with a protection system against the effects of power failure and various types of interference.
Properties
- Regulation parameters can be adjusted to current operating conditions and the type of boiler.
- The regulator is equipped with a protection system against the effects of power failure and various types of interference.
- The GH11TB controller is equipped with:
-inputs:
1.. to measure the temperature of the boiler outlet water (NTC type sensor),
2. to measure the temperature of the fuel feeder (NTC type sensor),
3. to measure the water temperature in the DHW boiler (NTC type sensor),
-digital input:
4. to connect the pin break sensor on the feeder – reed switch
– input (RS485) for connecting the GA01HA room panel from GECO - The controller also has four outputs enabling direct connection of devices operating at 230V, i.e.: fan, fuel feeder, central heating circulation pump, domestic hot water pump or mixing pump, depending on the operated heating system.
The GH19SA controller is a device that purposive to control heat water hydraulic system by using solar collectors.
The GECO solar collector controller is applicable to integrated systems with additional external devices (for example: gas boiler or storage tank electrical heater) in even very complex installations with many pumps and three-way valves.
The GH19SA controller contain two modules: control panel and executive module. The control panel can be instaled in the most functional location.
Properties
- Controll panel with sizeable LCD display guarantee Users remarkable functionalability and allows easy operation over controller
- In case of power failure occurs, controller keeps the parameter settings unchanged after re-use by users
- Sound and corresponding warning appears in case of System Alarm.
- Ability to controll additional hydraulic system variants for second solar collector.
- The module is interconnectable through many-ply RS 485 cable standard.
- The GH19SA controller allows automatic cooperation with 13 different most popular hydraulic system variants (Programs)
- The GECO controller is equipped with two PT 1000 sensor inputs , three NTC10k sensor inputs and five electromagnetic relay and triac (SCR relay) outputs
- Can cooperate with solar circuit pupm, three-way valve, hot water circuit pump and
back-up electrial heater - Excellent animation function of all running external devices presented on LCD display are very helpful during hydraulic system control
- The controller contain automatic temperature compensation sensor responsible for errors elimination emarged due to use of the very long wire betwen sensors and modules
The GH21TB controller is made using microprocessor technology using automatic surface mounting.
This regulator is a device used to control the process of preparing domestic hot water (DHW circuit) and enables operation of the main heating circuit (CH circuit).
Properties
- Regulation parameters can be adjusted to current operating conditions and the type of boiler
- The regulator is equipped with a protection system against the effects of power failure and various types of interference
- Each occurring failure, after being identified by the controller, is signaled graphically and acoustically in the form of a specific alarm condition
- Sterownik umożliwia obsługę automatyczną trzech konfiguracji instalacji, które całkowicie zaspokajają wymagania instalatora
- The controller enables automatic operation of three installation configurations that fully meet the requirements of the installer
- The device supports three temperature sensor inputs, digital input for the reed switch, additional input for the GA03HA room panel and four outputs for external devices
- The GH21TB controller is equipped with:
1.temperature inputs:
– to measure the temperature of the boiler outlet water;
– to measure the temperature of the fuel feeder;
– for measuring the water temperature in the boiler / central heating return temperature;
2.digital input:
– for connecting the pin break sensor on the boiler feeder – the so-called reed switch
3. input (RS485)– for connecting the GA03HA room panel from GECO, dedicated to the controller
Properties
The GH21WA controller is equipped with:
• Entries:
1. NTC temperature sensor;
• Exits:
1. Heater 1;
2. Heater 2;
3. Smoke machine
The GH22PC is a controller for air heating stove with pellet feeder. It feeds fuel precisely and controls air flow into the process of burning.
Stove with built-in GECO automatic enables stable control of the room temperature while effective burning a fuel and controlling the operation of the heating system.
Automatic supervision on stove and proper work of the combustion process is regulated by an exhaust gas sensor and a room sensor.
Properties
- Functional visualisation of casing and large readable graphic LCD display
- Two module construction (module + panel) enable assembly inside boiler construction.
- Operation lighter to support ignition process pellet.
- Possible to meassure flue gas temperature (PT 1000)
- Anit-stagnation protection for the executive devices – ANTI STOP function
- Automatic mode regulation which adjust fan rotation to individual stove dynamics.
- Controlling the temperature in the room with the possibility of settlement.
- Automatic ignition mode against extinguished.
- Possible to use temperature limiter STB for safety reason
- Sound and text alarm signals.
- Many language versions in the MENU.
- Boiler operational parameters archiving function, among others alarm controller record.
- Possibility of selecting type of controller regulation: STANDARD, GRATE MODE.
The stand-alone controller, hereinafter referred to as G-403-P01, is a convenient, modern and easy-to-use device. It was made using microprocessor technology using automatic surface assembly.
Depending on the installation method, the two-part housing allows you to install a control panel operating under safe voltage virtually anywhere, without the need to run power cables far from the controlled devices.
Properties
- The G-403-P01 controller is equipped with:
– two temperature sensors:
1. to measure the water temperature in the boiler,
2. to measure the temperature of the fuel feeder
– two digital inputs:
1. to connect a thermostat that can force the controller to enter the state maintenance, with controlled water circulation pump,
2. to connect the pin break sensor on the screw feeder. - It has four outputs enabling direct connection of devices operating at 230V.
- When used as a central heating boiler controller G-403-P01 stabilizes water temperature, and controls the fuel combustion process in the boiler, preventing it from extinguishing.
- Regulation parameters can be adjusted to current operating conditions and the type of boiler.
- It is equipped with a protection system against the effects of power failure and various other things type of interference.
- The controller does not require any special maintenance, the keyboard is made of a special type of foil that is resistant to high temperatures and most chemicals.
The G-403-P02 is a controller designed for central heating coal boilers with feeding screw. It stabilizes the temperature of water and controls process of combustion in the boiler
preventing a fire from burning out.
The G-403-P02 is adapted for TS-35 rail assembly, it has specially designed casing making it possible to install the controller in many different positions on the boiler.
The G-403-P02 makes possible connection of the additional pump that controls heating in the hot water tank.
Properties
- Modern visualization of casing.
- Simple and user-friendly method of programming and service.
- Two-piece construction (executive module + keyboard)
- Possibility for direct connection of the equipment working under 230V voltage.
- Control over the hot water preparation system (it is possible to connect additional hot water pump or mixing pump)
- Control over the fan and over the work of the fuel feeder.
- Clutch cotter pin break sensor on the motoreducer (reed relay)
- Feeder temperature sensor (protection against fire back into the feeder).
- Sound signal for the alarm.
- Provides storage of all controller settings while loss of network power.
- This controller is able to cooperate with any other room thermostat.
The stand-alone controller, hereinafter referred to as G-403-P03, is a convenient, modern and easy-to-use device. It was made using microprocessor technology using automatic surface assembly.
Depending on the installation method, the two-part housing allows you to install a control panel operating under safe voltage virtually anywhere, without the need to run power cables far from the controlled devices.
Properties
- G-403-P03 is equipped with one temperature sensor for measuring the temperature of the air blown out from the heater, and with one digital input for connecting a thermostat that controls the heater operation depending on the ambient temperature.
- It has four outputs enabling direct connection of devices operating at 230V.
- When used as an air heater controller, the G-403-P03 stabilizes the room temperature and controls the fuel combustion process in the heater.
- It is equipped with a protection system against the effects of power failure and various types of interference.
- The controller does not require any special maintenance, the keyboard is made of a special type of foil that is resistant to high temperatures and most chemicals.
The G-403-P04 is designed to control pumps operation. It stabilizes the temperature in the solar collectors systems.
Additionally the controller supports integrated systems with one additional device like: utility hot water tank, gas, oil or solid fuel boiler, stove, floor or wall heating systems etc.
Two-pieces construction allows flexible installation especially when aesthetical presentation in the apartment matters.
Properties
- Modern visualization of casing.
- Simple and user-friendly method of programming and service.
- Two-pieces construction (executive module + keyboard)
- Possibility for direct connection of the equipment working under 230V voltage
such as:
a) Solar collectors main pump
b) Additional device pump
c) Three-way valve - Sound signal for the alarm.
- Provides storage of all controller settings while loss of network power.
- Possibility for connection of the second solar collector
The stand-alone controller, hereinafter referred to as G-403-P05, is a convenient, modern and easy-to-use device. It was made using microprocessor technology using automatic surface assembly.
Depending on the installation method, the two-part housing allows you to install a control panel operating under safe voltage virtually anywhere, without the need to run power cables far from the controlled devices.
Properties
- The G-403-P05 controller is equipped with:
1.four measurement inputs enabling the connection of:
– air temperature sensor from the GWC bed,
– inlet air temperature sensor from the manor house (field),
– room temperature sensor,
– time controller.
2.four outputs enabling connection:
– three-way throttle (closing/opening),
– pump or self-closing valve (air heating),
– fan. - The outputs enable direct connection of devices operating at 230V 50Hz, with powers not exceeding the values given on the sticker of the executive module.
- Regulation parameters can be adjusted to current operating conditions and source size.
- It is also equipped with a protection system against the effects of power failure and various types of interference.
- The controller does not require any special maintenance, the keyboard is made of a special type of foil that is resistant to high temperatures and most chemicals.
The G-403-P07 is the controller designed for central heating coal boilers with piston or drawer feeder. It stabilizes the temperature of water and controls process of combustion in the boiler preventing a fire from burning out.
The G-403-P07 is adapted for TS-35 rail assembly, it has specially designed casing making it possible to install the controller in many different positions on the boiler.
The G-403-P07 makes possible connection of the additional pump that controls heating in the hot water tank.
Properties
- Modern visualization of casing
- Simple and user-friendly method of programming and service
- Two-piece construction (executive module + keyboard)
- Possibility for direct connection of the equipment working under 230V voltage.
- Control over the hot water preparation system (it is possible to connect additional hot water pump or mixing pump)
- Control over the fan and over the work of the fuel feeder.
- Clutch cotter pin break sensor on the motoreducer (reed relay)
- Sound signal for the alarm
- Provides storage of all controller settings while loss of network power
- This controller is able to cooperate with any other room thermostat
The stand-alone controller, hereinafter referred to as G-403-P09, is a convenient, modern and easy-to-use device. It was made using microprocessor technology using automatic surface assembly.
Depending on the installation method, the two-part housing allows you to install a control panel operating under safe voltage virtually anywhere, without the need to run power cables far from the controlled devices.
Properties
- G-403-P09 is equipped with two temperature sensors for measuring the temperature of the outlet water from the boiler and the inlet water (to control the mixing pump), and with one digital input for connecting a thermostat that can force the controller to switch to the holding mode.
- It also has four outputs enabling direct connection of devices operating at 230V.
- When used as a central heating boiler controller G-403-P09 stabilizes the water temperature and controls the fuel combustion process in the boiler, preventing it from extinguishing.
- Regulation parameters can be adjusted to current operating conditions and the type of boiler.
- It is equipped with a protection system against the effects of power failure and various types of interference.
-
The controller does not require any special maintenance, the keyboard is made of a special type of foil that is resistant to high temperatures and most chemicals.
The G-403-P11 stand-alone Control Block is designed to control the operation of pumps and stabilize the temperature in systems using fireplaces with a water jacket.
The G-403-P11 controller is a convenient, modern and easy-to-use device. It was made using microprocessor technology using automatic surface assembly.
Depending on the installation method, the two-part housing allows you to install a control panel operating under safe voltage virtually anywhere, without the need to run power cables far from the controlled devices.
Properties
- The G-403-P11 controller is equipped with:
three temperature sensors:
1. to measure the temperature of the fireplace – T1,
2. to measure the temperature of the DHW tank – T2,
3. for measuring additional temperature (central heating or solar circuit) – additional option - It has outputs enabling direct connection of devices operating at 230V, such as: the main PK fireplace pump and an additional pump (PCO or PKOL) and a 12V-controlled damper.
- Regulation parameters can be adjusted to current operating conditions and type of installation.
- The controller is also equipped with a protection system against the effects of power failure and various types of interference.
-
The controller does not require any special maintenance, the keyboard is made of a special type of foil that is resistant to high temperatures and most chemicals.
The G-406-P01 is the controller designed for central heating culm and coal boilers with air blow in. It stabilizes the temperature of water and controls process of combustion in the boiler preventing a fire from burning out.
The G-406-P01 is adapted for TS-35 rail assembly, it has specially designed casing making it possible to install the controller in many different positions on the boiler.
The G-406-P01 makes possible connection of the additional pump that controls heating in the hot water tank.
Properties
- Modern visualization of casing.
- Simple and user-friendly method of programming and service.
- Two-piece construction (executive module + keyboard)
- Possibility for direct connection of the equipment working under 230V voltage.
- Control over the hot water preparation system (it is possible to connect additional hot water pump or mixing pump)
- Smooth control over the fan rotations.
- The temperature sensor of the outlet water from the boiler
- Sound signal for the alarm.
- Provides storage of all controller settings while loss of network power.
- Chimney temperature sensor.
The Self contained (Independent) Control Block (SBR) hereinafter referred to as G-406-P02 is a modern, convenient and easy to use unit. It has been completed in the microprocessor technology with use of surface assembly. The controller comprises the keyboard with LED display connected by means of the band wires with the execution module in the plastic enclosure for bus. Detector cables and actuation units are connected to the execution module by means of joints, in accordance with description on the enclosure label.
Properties
- The G-406-P02 controller has been equipped with the temperature detectors:
-for measuring boiler water outlet temperature,
-for measuring boiler water inlet temperature (return) or domestic hot water circulation. - Controller also holds outputs allowing the direct connection of: central heating pump, mixer pump and air supply fan, operating under the voltage of 230 volts, with power consumption as provided in the table.
- The indication lamp on the module provides the information on the status of supply and fuse.
- The keyboard has been completed from the special type of film resistant to high temperature and the majority of chemicals.
The G-406-P03 is the controller designed for central heating blow boilers with the solid fuel feeding. It stabilizes the temperature of water and controls process of combustion in the boiler preventing a fire from burning out.
The G-406-P03 is adapted for TS-35 rail assembly, it has specially designed casing making it possible to install the controller in many different positions on the boiler.
The G-406-P03 makes possible connection of the additional pump that controls heating in the hot water tank.
Properties
- Modern visualization of casing.
- Simple and user-friendly method of programming and service.
- Two-piece construction (executive module + keyboard)
- Possibility for direct connection of the equipment working under 230V voltage.
- Control over the hot water preparation system (it is possible to connect additional hot water pump or mixing pump)
- Smooth control over the fan rotations.
- The temperature sensor of the outlet water from the boiler
- Sound signal for the alarm.
- Provides storage of all controller settings while loss of network power.
- This controller is able to cooperate with any other room thermostat.
The stand-alone G-406-P04 controller is a convenient, modern and easy-to-use device. It was made using microprocessor technology using automatic surface assembly.
Depending on the installation method, the two-part housing allows you to install a control panel operating under safe voltage virtually anywhere, without the need to run power cables far from the controlled devices.
Properties
- G-406-P04 is equipped with three temperature sensors:
-For measuring the water temperature in the boiler
-For measuring the chimney temperature
-For measuring the temperature of the sawdust feeder - It has three outputs enabling direct connection of devices operating at 230V
- When used as a central heating boiler controller G-406-P04 stabilizes the water temperature and controls the fuel combustion process in the furnace, preventing it from extinguishing.
- The regulation parameters can be adjusted to the current ones operating conditions and type of boiler. It is equipped with a protection system against the effects of power failure and various types of interference.
-
The controller does not require any special maintenance, the keyboard is made of a special type of foil that is resistant to high temperatures and most chemicals.
The stand-alone G-406-P06 controller is a convenient, modern and easy-to-use device. It was made using microprocessor technology using automatic surface assembly.
Depending on the installation method, the two-part housing allows you to install a control panel operating under safe voltage virtually anywhere, without the need to run power cables far from the controlled devices.
Properties
- The G-406-P06 controller is equipped with:
-temperature sensors:
1. to measure the temperature of the boiler outlet water,
2. to measure the temperature of the fuel feeder
3. for measuring the exhaust gas temperature in the chimney: PT-1000 - It has outputs enabling direct connection of devices operating at 230V, such as: fan, fuel feeder, central heating circulation pump.
- When used as a central heating boiler controller the G-406-P06 regulator stabilizes water temperature, and controls the fuel combustion process in the boiler, preventing it from extinguishing. Regulation parameters can be adjusted to current operating conditions and the type of boiler.
- It is equipped with a protection system against the effects of power failure and various types of interference.
- It is equipped with a protection system against the effects of power failure and various types of interference.
The G-406-P07 is the controller designed for central heating coal boilers with piston or drawer feeder. It stabilizes the temperature of water and controls process of combustion in the boiler preventing a fire from burning out.
The G-406-P07 is adapted for TS-35 rail assembly, it has specially designed casing making it possible to install the controller in many different positions on the boiler.
The G-406-P07 makes possible connection of the additional pump that controls heating in the hot water tank.
Properties
- Modern visualization of casing.
- Simple and user-friendly method of programming and service.
- Two-piece construction (executive module + keyboard)
- Possibility for direct connection of the equipment working under 230V voltage.
- Control over the hot water preparation system
- The fan rotation smooth adjustment
- Clutch cotter pin break sensor on the motoreducer (reed relay)
- Sound signal for the alarm.
- Provides storage of all controller settings while loss of network power.
- This controller is able to cooperate with any other room thermostat.
The G-406-P09 is the controller designed for central heating coal boilers with screw feeder. It stabilizes the temperature of water and controls process of combustion in the boiler preventing a fire from burning out.
The G-406-P09 is adapted for TS-35 rail assembly, it has specially designed casing making it possible to install the controller in many different positions on the boiler
The G-406-P09 makes possible connection of the additional pump that controls heating in the hot water tank.
Properties
- Modern visualization of casing
- Simple and user-friendly method of programming and service.
- Two-piece construction (executive module + keyboard)
- Possibility for direct connection of the equipment working under 230V voltage.
- Control over the hot water preparation system
- The fan rotation smooth adjustment
- Feeder temperature sensor (flame-back protection for the feeder)
- Sound signal for the alarm.
- Provides storage of all controller settings while loss of network power.
- This controller is able to cooperate with any other room thermostat.
The G-406-P11 is a controller for central heating boilers with burners prepared to burn wooden pellets. It feeds fuel precisely and controls air flow into the process of burning. With the inclusion of the heater device and flame senor the controller allows automatic flame ignition in case of a fuel burnout.
The G-406-P11 provides long and automatic boiler operation by maintaining a constant level of the fuel in the additional container.*
The G-406-P11 is adapted for TS-35 rail assembly, it has specially designed casing making it possible to install the controller in many different positions on the boiler.
*possibility for burners with additional tank.
Properties
- Modern visualization of casing.
- Simple and user-friendly method of programming and service.
- Two-piece construction (executive module + keyboard)
- Control over two screw feeders: the burner and the container
- Prepared to operate with IWABO and ECOTEC burners.
- Flame Ignition+electric heater control.
- Smooth and simple control for fan rotations.
- Feeder temperature sensor (flame-back protection for the feeder).
- Flame sensor.
- Sound signal for the alarm.
- Provides storage of all controller settings while loss of network power.
The stand-alone controller, hereinafter referred to as G-406-P12, is a convenient, modern and easy-to-use device. It was made using microprocessor technology using automatic surface assembly.
Depending on the installation method, the two-part housing allows you to install a control panel operating under safe voltage virtually anywhere, without the need to run power cables far from the controlled devices.
Properties
- The G-406-P12 controller is equipped with:
-two sensors:
1. to measure the temperature of the boiler outlet water,
2. for flame control - It has outputs enabling direct connection of devices operating at 230V, such as: fan, fuel feeder, central heating circulation pump. and ignition heater.
- When used as a central heating boiler controller for pellets and wood, the G-406-P12 regulator stabilizes the water temperature and controls the process of igniting and burning the fuel in the boiler, preventing it from extinguishing.
- Regulation parameters can be adjusted to current operating conditions and the type of boiler.
- It is equipped with a protection system against the effects of power failure and various types of interference.
-
The controller does not require any special maintenance, the keyboard is made of a special type of foil that is resistant to high temperatures and most chemicals.
The stand-alone controller, hereinafter referred to as G-406-P13, is a convenient, modern and easy-to-use device. It was made using microprocessor technology using automatic surface assembly.
Depending on the installation method, the two-part housing allows you to install a control panel operating under safe voltage virtually anywhere, without the need to run power cables far from the controlled devices.
Properties
- The G-406-P13 controller is equipped with sensors:
1. to measure the temperature of the boiler outlet water,
2. to protect the temperature of the fuel feeder
3. for flame control
4. to control the fuel level in the intermediate tank - It has outputs enabling direct connection of devices operating at 230V, such as: fan, fuel feeder, tank feeder, central heating circulation pump. and ignition heater
- When used as a central heating boiler controller for pellets and oats, the G-406-P13 regulator stabilizes the water temperature and controls the process of igniting and burning the fuel in the boiler, preventing it from extinguishing.
- Regulation parameters can be adjusted to current operating conditions and the type of boiler.
-
It is equipped with a protection system against the effects of power failure and various types of interference.
The Independent Regulation Block (SBR), hereinafter referred to as G-406-P16, is a modern, convenient and easy-to-use device. It was made using microprocessor technology using surface mounting. The controller consists of a keyboard with an LED display connected with a ribbon to the executive module in a plastic rail housing. Cables of sensors and actuators are connected to the executive module using connectors, as described on the housing sticker.
Properties
- The G-406-P16 controller is equipped with:
-temperature sensors:
1. to measure the temperature of the boiler outlet water,
2. to measure the temperature of exhaust gases in the chimney
3. to measure the water temperature in the domestic hot water boiler. (option) - It also has outputs enabling direct connection of: central heating pump, domestic hot water pump. and an exhaust fan operating at 230V.
- The indicator light on the module informs about the status of the power supply and fuse.
-
The G-406-P16 regulator does not require any special maintenance. The keyboard is made of a special type of foil that is resistant to high temperatures and most chemicals.
In addition to standard production, we also cooperate with our customers in the area of extensive automation. Through our knowledge and experience, we substantively support newly emerging investments and start-ups.